Cat litter box enclosures
Litter Cabinet with Hood
A 60 cm cabinet that hides the tray behind a slatted door, with a hooded interior, a walnut-look top and a side shelf for scoop and bags.
- MOQ
- 50 pcs
- Loading
- 850 / 40HQ
OEM · ODM · one-piece sampling
Pet furniture your customers keep in the living room.
Woo Nest builds flat-packed cat cabinets, dog crate consoles and wall systems from certified boards, with PUR edge banding on every visible edge. A cabinet workshop in Zhejiang, for brands that want one sample before one container.
- One piece sampled in 7 days from your drawing
- PUR edge banding instead of EVA — the joint that survives humid air
- CARB P2 / E0 board, with the board supplier's certificate attached
- FOB Ningbo or Shanghai, 25–35 days after sample approval
No minimum on samples. First production order 50–100 pcs per design.
Woo Nest cat litter cabinet with walnut top, slatted door and side shelf
The range
Four categories, one board‑and‑edge system
Every product is built from the same certified boards, the same 0.5–2.0 mm ABS edging and the same PUR glue line — so a container mixed across categories looks like one collection.
1
Cat litter box enclosures
Furniture that hides the litter tray: washable interiors, ventilated hoods, magazine and plant shelves on top.
View →
2
Dog crate furniture
Crate-and-console hybrids: steel or aluminium mesh in a walnut-and-birch carcass your customers can put in the living room.
View →
3
Cat trees & wall systems
Modular wall shelves, climbing steps and floor-to-ceiling towers built from the same boards as the rest of the range.
View →
4
Pet feeding stations
Raised feeders with stainless bowls, spill lips and adjustable heights — flat-packed and ready for private label.
View →
Ready to sample
Six designs to start the range
Cat litter box enclosures
Litter Cabinet, Closed Door
The same 60 cm body as the hooded cabinet, with a solid door and a vent panel at the back — for buyers who want the tray completely out of sight.
- MOQ
- 50 pcs
- Loading
- 800 / 40HQ
Dog crate furniture
Dog Crate Console
A 100 cm console that turns a 36-inch wire crate into living-room furniture: slatted front, walnut-look top, two open shelves behind the crate bay.
- MOQ
- 30 pcs
- Loading
- 410 / 40HQ
Dog crate furniture
Double Crate Console
Two 24-inch crate bays side by side under one 132 cm console top — for households with two dogs, and for buyers who want the highest console per carton.
- MOQ
- 30 pcs
- Loading
- 380 / 40HQ
Cat trees & wall systems
Modular Cat Wall Set
Five wall-mounted pieces — two stepped shelves, a box step, a bridge and a lounger — sold as a set or as individual panels, all in the same board and edge system.
- MOQ
- 50 pcs
- Loading
- 810 / 40HQ
Feeding stations
Raised Feeder Station
A raised double-bowl stand with an adjustable leg set, two stainless bowls and a spill tray — the lowest-cost SKU in the range and the easiest to trial.
- MOQ
- 100 pcs
- Loading
- 1,900 / 40HQ
The difference
PUR edge banding, and why it matters in a bathroom
Most pet furniture is edged with EVA hot-melt glue. It is cheap, it is fast, and it is the first thing that fails when a litter cabinet lives next to a shower.
We run PUR (polyurethane reactive) glue on our edge banders because that is what our cabinet lines use for kitchen and bathroom carcasses. The glue cures by reacting with moisture in the air, so the bond is water-resistant rather than water-sensitive.
Practically, that means the ABS edge stays tight through humidity swings, wiping, and the occasional splash — and the joint is close enough to the board colour that it reads as a solid panel, not a taped edge.
- 0.5–2.0 mm ABS edging, colour-matched to the board and the foil
- PUR glue line on every exposed edge, including shelf fronts and door returns
- Edges trimmed and radiused by machine, then hand-checked on the sample
| PUR (ours) | EVA (most factories) | |
|---|---|---|
| Glue | Polyurethane reactive, moisture-curing | EVA hot melt, thermoplastic |
| Humidity | Water-resistant bond, suited to kitchens and baths | Softens with heat, can lift over time |
| Joint line | Tight and near-invisible when colour-matched | Visible line; glue creep darkens it |
| Cost | Higher glue and tooling cost | Cheaper, faster |
Ask for a cut-off sample and put it in water for 24 hours. That is the test we expect from a serious buyer.
Paperwork
Certified board, honest paperwork
We buy boards; we do not make them. So the certificate belongs to the board supplier, and we say so.
For the US market we buy CARB P2 compliant MDF and particleboard, with TSCA Title VI documentation from the mill. For Europe, E0 / ENF grades under GB/T 39600 or EN 717-1 test reports are available on request.
What we will not do is put an FSC or CE logo on a page because it looks reassuring. FSC is only claimed when the board we are running that week has a valid chain-of-custody number, and we pass the number through to you.
- Board certificates supplied as PDF copies with the shipment documents
- Formaldehyde class stated per SKU, not per website
- FSC-certified board available on request, quoted separately
OEM / ODM
OEM and ODM from a cabinet workshop
We are set up like a small furniture factory, not a trading company with a photo studio.
Panels are cut and drilled on CNC, edged in-house, assembled and packed in the same building. That is why we can take a change — another width, a mesh front, a different foil — and quote it the same week instead of sending it to a third party.
- Your logo: laser engraving, foil stamp on cartons, printed manuals
- Your packaging: retail carton with barcode and Amazon-ready labels
- Your design: we draw from a photo, a competitor sample or a dimensioned sketch
- Low first order: 50–100 pcs per design, 200–300 pcs once sizes or foils change
How it works
From enquiry to container
-
1
Send the reference
A photo, a link, a sample or a drawing — plus the quantity you have in mind.
-
2
Quote and drawing
FOB price, board and finish options, carton size and container loading, within 1–2 business days.
-
3
Sample
One piece, 7 days from your sample or 15 days from our drawing. Photos before it ships.
-
4
Approve and produce
25–35 days after approval. AQL 2.5 inspection before packing, photos of the finished lot.
-
5
Ship and repeat
FOB Ningbo or Shanghai, documents by courier, and a spare-parts list for reorders.
Order one piece before you order one hundred.
Send a drawing, a photo or a competitor link. We quote the sample, build it, and send photos before it ships. Sampling fee is credited against your first order.
Questions buyers ask
Straight answers
What is your MOQ?
50–100 pcs per design for a first order in our standard sizes and foils. 200–300 pcs when you change a dimension, a finish or the carton.
Can I order a single piece first?
Yes. That is the point of our sampling program. The sample fee is calculated from the board, hardware and labour of that one piece, and it is credited in full against your first production order.
Which boards do you use?
CARB P2 / E0 MDF and particleboard from Chinese mills with TSCA Title VI documentation, melamine-faced or veneered. FSC-certified board is available on request and quoted separately.
How long does production take?
7 days for a sample from your sample, 15 days for a sample from our drawing, then 25–35 days for production after sample approval.
Do you ship to Amazon warehouses?
We can pack to your FBA requirements — barcode labels, poly bags with suffocation warnings, carton size limits and pallet configuration. Tell us the marketplace and we will quote to that spec.
Next step
Tell us what you want to sell. We'll tell you what it costs to make.
Four fields to start — name, email, country and the category you're looking at. Everything else can wait until you've seen the price.